Monday, 10 October 2011
Jobs opening at Chiyoda (Bintulu & Kuala Lumpur)
Chiyoda Malaysia Sdn. Bhd. is an affiliated company of Chiyoda Corporation, Japan which is one of the leading global engineering companies in the fields of LNG, petroleum and petrochemical industries.
Chiyoda Malaysia was established on 12th June 1974 and since then, Chiyoda Malaysia has contributed to the growth and prosperity of the oil & gas industries in Malaysia and grown into one of the leading EPCC contractors in the country.
Chiyoda Malaysia provides high standards of services for multi-disciplinary engineering, procurement, construction and commissioning for turnkey projects and also feasibility studies, front end engineering design, detailed engineering, project and construction management in natural gas, petroleum, petrochemical, bio-fuel, environmental protection and other related industrial plants.
Chiyoda Malaysia is certified to ISO 9001:2008 in the area of "Provision of Engineering, Procurement, Construction and Commissioning Services for Oil & Gas, Petrochemical and Other Related Industries".
We have vacancies in the following positions: (Last Updated: October, 2011)
GROUP A (POSITION TO BE BASED IN BINTULU, SARAWAK )
1. PROJECT/FIELD CONSTRUCTION ENGINEER
Experience in Project planning/scheduling, control and management, tendering, contract administration and project reporting.
Exposure to Plant Construction supervision and activities.
Exposure to relevant Government application and approval for the project being handled.
Capable to prepare project schedule in MS Project/ Primavera.
Exposure to Oil and Gas & Petrochemical is preferred.
2. PIPING SUPERVISOR
Well versed in ANSI, ASME, API & NACE Codes related to piping.
Experience to Piping Plant construction activities.
Familiar with piping components and development of material specification.
Able to perform layout design and prepare GA, Isometric & Pipe support drawings.
Knowledge of PDS 3D will be a strong advantage.
Understand test package document such as ASME, Test Block Diagram, ISO drawing, Calibration Record for Pressure Gauge.
At least two years' experience of piping pressure test inspection.
3. QC DOCUMENT CONTROLLER/CONSTRUCTION CLERK
SPM holder with minimum 3 years working experience.
Computer literate and have good interpersonal and communication skills.
Must be familiar with QC requirements.
Dependable and result oriented.
4. ELECTRICAL SUPERVISOR
Technical qualification of HND technical qualification or equivalent in Electrical Engineering.
Fully conversant in the installation and maintenance requirement for certified EX EQUIPMENT used in hazardous area.
Minimum 6 years of working experience in construction supervision work.
Computer literate and able to communicate in English.
Experience in building electrical and power supply work.
Have experience in construction quality control and HSE requirement.
5. QA/QC MANAGER - CIVIL
Possess a recognized degree in Civil Engineering.
Experience in QA/QC environment ISO 9001:2000 and implementation of QMS.
Familiar with the requirement of International Codes and Standards such as ASME, ANSI, API and BS.
Exposure to Petrochemical Plant Construction.
Experience in developing Project Quality Plan, Work Method Statement and ITP;
QC job responsibility in multi-disciplined field inspection work in construction work.
6. MECHANICAL EQUIPMENT SUPERVISOR
Possess certificate/diploma in Mechanical Engineering or equivalent.
Minimum 6 years working experience in equipment inspection and supervision for mechanical equipment installation work.
Good written skills and communicate well in English.
Good knowledge/ experience on mechanical drawings, specification and procedure.
Experience in supervision of M&E works will be an added advantage;
Good experience in construction quality control and HSE requirement.
7. STATIC/ROTATING EQUIPMENT SUPERVISOR
Possess certificate/diploma in Mechanical Engineering or equivalent.
Minimum 6 years working experience in equipment inspection and supervision for mechanical equipment installation work.
Good written skills and communicate well in English.
Experience with mechanical drawings, specification, procedure for static equipments & structural erection/installations.
Familiar with the requirement of International Codes and Standards.
Have experience in construction quality control and HSE requirement.
8. INSULATION SUPERVISOR
Possess certificate/diploma in Engineering or equivalent.
Minimum 6 years working experience in insulation work in Oil & Gas Industry.
Good written skills and communicate well in English.
Experience with the design of piping systems and piping fabrication/installation.
Have experience in construction quality control and HSE requirement.
9. HSE OFFICER
Diploma or Degree in Engineering or equivalent.
Must be registered with DOSH or to those who has attended SHO training by NIOSH and passed SHO examination by DOSH.
Well versed with Malaysian legislation such as OSHA 1994,FMA 1967, EQA 1974 etc;
At least 8 year(s) of working experience in the related field is required for this position.
Preferably specializing in Environmental/Health/Safety or equivalent.
Good written skills and communicate well in English and Bahasa Malaysia .
10. INSTRUMENT SUPERVISOR
Possess diploma/ degreein Instrument or equivalent.
Minimum 6 years working experience in construction supervision work.
Able to manage, organize and oversee the daily work at site.
Good written skills and communicate well in English.
Strong coordination skills for interfacing work with other work discipline.
Good knowledge on quality and HSE requirements.
GROUP B (POSITION TO BE BASED IN KUALA LUMPUR )
Experience in Project planning/scheduling, control and management, tendering, contract administration and project reporting.
Exposure to Plant Construction supervision and activities.
Exposure to relevant Government application and approval for the project being handled.
Capable to prepare project schedule in MS Project/ Primavera.
Exposure to Oil and Gas & Petrochemical is preferred.
2. PIPING SUPERVISOR
Well versed in ANSI, ASME, API & NACE Codes related to piping.
Experience to Piping Plant construction activities.
Familiar with piping components and development of material specification.
Able to perform layout design and prepare GA, Isometric & Pipe support drawings.
Knowledge of PDS 3D will be a strong advantage.
Understand test package document such as ASME, Test Block Diagram, ISO drawing, Calibration Record for Pressure Gauge.
At least two years' experience of piping pressure test inspection.
3. QC DOCUMENT CONTROLLER/CONSTRUCTION CLERK
SPM holder with minimum 3 years working experience.
Computer literate and have good interpersonal and communication skills.
Must be familiar with QC requirements.
Dependable and result oriented.
4. ELECTRICAL SUPERVISOR
Technical qualification of HND technical qualification or equivalent in Electrical Engineering.
Fully conversant in the installation and maintenance requirement for certified EX EQUIPMENT used in hazardous area.
Minimum 6 years of working experience in construction supervision work.
Computer literate and able to communicate in English.
Experience in building electrical and power supply work.
Have experience in construction quality control and HSE requirement.
5. QA/QC MANAGER - CIVIL
Possess a recognized degree in Civil Engineering.
Experience in QA/QC environment ISO 9001:2000 and implementation of QMS.
Familiar with the requirement of International Codes and Standards such as ASME, ANSI, API and BS.
Exposure to Petrochemical Plant Construction.
Experience in developing Project Quality Plan, Work Method Statement and ITP;
QC job responsibility in multi-disciplined field inspection work in construction work.
6. MECHANICAL EQUIPMENT SUPERVISOR
Possess certificate/diploma in Mechanical Engineering or equivalent.
Minimum 6 years working experience in equipment inspection and supervision for mechanical equipment installation work.
Good written skills and communicate well in English.
Good knowledge/ experience on mechanical drawings, specification and procedure.
Experience in supervision of M&E works will be an added advantage;
Good experience in construction quality control and HSE requirement.
7. STATIC/ROTATING EQUIPMENT SUPERVISOR
Possess certificate/diploma in Mechanical Engineering or equivalent.
Minimum 6 years working experience in equipment inspection and supervision for mechanical equipment installation work.
Good written skills and communicate well in English.
Experience with mechanical drawings, specification, procedure for static equipments & structural erection/installations.
Familiar with the requirement of International Codes and Standards.
Have experience in construction quality control and HSE requirement.
8. INSULATION SUPERVISOR
Possess certificate/diploma in Engineering or equivalent.
Minimum 6 years working experience in insulation work in Oil & Gas Industry.
Good written skills and communicate well in English.
Experience with the design of piping systems and piping fabrication/installation.
Have experience in construction quality control and HSE requirement.
9. HSE OFFICER
Diploma or Degree in Engineering or equivalent.
Must be registered with DOSH or to those who has attended SHO training by NIOSH and passed SHO examination by DOSH.
Well versed with Malaysian legislation such as OSHA 1994,FMA 1967, EQA 1974 etc;
At least 8 year(s) of working experience in the related field is required for this position.
Preferably specializing in Environmental/Health/Safety or equivalent.
Good written skills and communicate well in English and Bahasa Malaysia .
10. INSTRUMENT SUPERVISOR
Possess diploma/ degreein Instrument or equivalent.
Minimum 6 years working experience in construction supervision work.
Able to manage, organize and oversee the daily work at site.
Good written skills and communicate well in English.
Strong coordination skills for interfacing work with other work discipline.
Good knowledge on quality and HSE requirements.
GROUP B (POSITION TO BE BASED IN KUALA LUMPUR )
1. SENIOR PROCESS ENGINEER - Code: K05
Requirements:
Possess a recognized degree in Chemical Engineering/Petroleum Engineering with minimum 6 years working experience.
Knowledge in preparation of Process Flow Diagram (PFD) with material & energy balance.
Knowledge in preparation of Piping and Instrumentation Diagram (P&ID).
Knowledge in preparation of Data Sheets furnishing process data.
Able to conduct Hazop and perform process studies and optimization.
Experience in pre-commissioning and commissioning execution work (inclusive development of procedure and schedule).
2. PIPING ENGINEER - Code: K22 / SENIOR PIPING ENGINEER - Code: K01
Requirements:
Possess a recognized degree in Chemical/Mechanical Engineering with 4 years working experience for Piping Engineer.
Possess a recognized degree in Chemical/Mechanical Engineering with minimum 8 years working experience for Senior Piping Engineer.
Well versed in ANSI, ASME, API & NACE Codes related to piping.
Ability to perform piping calculations (wall thickness, branch reinforcement, stress analysis).
Familiar with piping components and development of material specifications.
Able to perform layout design and prepare GA, Isometric & Pipe support drawings.
Knowledge of PDS 3D will be a strong advantage for Piping Designer position.
3. SENIOR ELECTRICAL ENGINEER - Code: K31
Requirements:
Possess a recognized degree in Electrical Engineering with 6 years working experience.
Familiar with all electrical design works and systems such as HV, LV , ELV, Lightning Protection, Cathodic Protection etc.
Job Description:
Preparation of SLD, layouts, Schematic Diagram.
Develop engineering documents such as calculation, specification, requisition, bid evaluation and others.
Coordination with other disciplines and liaison with authorities, consultant and vendors.
Reporting to Electrical Section Head and Project Manager.
4. MECHANICAL ENGINEER - Code: K24
Requirements:
Possess a recognized degree in Mechanical Engineer with minimum 3 to 4 years working experience in oil & gas, petrochemical, chemical or related industry.
Knowledge of static/rotating equipment.
Knowledge in preparation of Datasheets, Specifications, Technical Requisition and Vendor Technical Evaluation.
Relevant knowledge in API, ASME, TEMA, NACE & ISO Codes.
Vendor data/design/drawing review.
Construction site experience is an added advantage.
Preparation of technical and commercial proposal.
Relevant site experience in installation, supervision, trouble shooting, inspection and testing.
5. M & E ENGINEER - Code: K19
Requirements:
A recognized degree in Mechanical/Electrical Engineering with 4 to 5 years working experience.
Good knowledge in local and international codes and standards..
Work experience within a consultancy environment or building Industry.
Relevant experience in supervision of M&E construction works.
Hands-on exposure in :
Detailed design of HVAC and fire protection.
Waste water/Oily water system.
6. API-650 TANK ENGINEER
Requirements:
Possess degree in Engineering or its equivalent with minimum 6 years working experience in Oil & Gas Industry.
Familiar with tank fabrication and erection work.
Able to perform design calculations and produce tank fabrication drawings
Knowledge in API-650 Codes and Standards is required..
Able to lead Subcontractor in executing construction Tank Work in accordance to quality and work schedule requirement.
Having good in work planning, control and supervision work.
7. PROCUREMENT EXECUTIVE - Code: K13
Requirements:
Possess a recognized Diploma in Engineering or business management fields.
Candidate with at least 5 years of procurement & purchasing experience.
Experience in desk expediting and shop visit expediting.
Good negotiation skills is necessary to diligently source for quotation and negotiate with vendors/suppliers.
Working knowledge of international sourcing will be an added advantage.
Experience in INCOTERMS, import taxation, export duties and custom clearance.
Experience in dealing with MOF, MIDA, Custom tax exemption matters and Ministry of Finance.
8. QA/QC MANAGER - CIVIL MECHANICAL - Code: K36
Requirements:
Posses Degree in Civil/Building/Mechanical or other Engineering Field.
Minimum 10 years QA/QC working experience in QC Inspection work for Civil, Structure Infra Work and Mechanical/Tankage will be required.
Knowledge and exposure in design work for Civil&Structural and M&E work will be added advantage.
Knowledge in WPS,PQR,WPQT for Mechanical Work is mandatory required.
Well versed with BS Code, ASTM, MS Code and JKR Standard.
Have experience in construction quality control, QA/QC documentation requirement, Inspection Test Plan (ITP), Work Method Statement, testing requirements etc.
Huge exposure on ISO 9001 and experience in Oil & Gas Industry is preferred.
If you are a dynamic individual looking for a fast paced and exciting career, please send your resume with your recent passport-sized Photograph (NR), stating present and expected salary, to the following address:
The Administration Department
Chiyoda Malaysia Sdn. Bhd.
15th Floor, Menara Maxisegar,
Jalan Pandan Indah 4/2, Pandan Indah,
55100 Kuala Lumpur.
or e-mail us at chiyoda@chiyoda.com.my
Requirements:
Possess a recognized degree in Chemical Engineering/Petroleum Engineering with minimum 6 years working experience.
Knowledge in preparation of Process Flow Diagram (PFD) with material & energy balance.
Knowledge in preparation of Piping and Instrumentation Diagram (P&ID).
Knowledge in preparation of Data Sheets furnishing process data.
Able to conduct Hazop and perform process studies and optimization.
Experience in pre-commissioning and commissioning execution work (inclusive development of procedure and schedule).
2. PIPING ENGINEER - Code: K22 / SENIOR PIPING ENGINEER - Code: K01
Requirements:
Possess a recognized degree in Chemical/Mechanical Engineering with 4 years working experience for Piping Engineer.
Possess a recognized degree in Chemical/Mechanical Engineering with minimum 8 years working experience for Senior Piping Engineer.
Well versed in ANSI, ASME, API & NACE Codes related to piping.
Ability to perform piping calculations (wall thickness, branch reinforcement, stress analysis).
Familiar with piping components and development of material specifications.
Able to perform layout design and prepare GA, Isometric & Pipe support drawings.
Knowledge of PDS 3D will be a strong advantage for Piping Designer position.
3. SENIOR ELECTRICAL ENGINEER - Code: K31
Requirements:
Possess a recognized degree in Electrical Engineering with 6 years working experience.
Familiar with all electrical design works and systems such as HV, LV , ELV, Lightning Protection, Cathodic Protection etc.
Job Description:
Preparation of SLD, layouts, Schematic Diagram.
Develop engineering documents such as calculation, specification, requisition, bid evaluation and others.
Coordination with other disciplines and liaison with authorities, consultant and vendors.
Reporting to Electrical Section Head and Project Manager.
4. MECHANICAL ENGINEER - Code: K24
Requirements:
Possess a recognized degree in Mechanical Engineer with minimum 3 to 4 years working experience in oil & gas, petrochemical, chemical or related industry.
Knowledge of static/rotating equipment.
Knowledge in preparation of Datasheets, Specifications, Technical Requisition and Vendor Technical Evaluation.
Relevant knowledge in API, ASME, TEMA, NACE & ISO Codes.
Vendor data/design/drawing review.
Construction site experience is an added advantage.
Preparation of technical and commercial proposal.
Relevant site experience in installation, supervision, trouble shooting, inspection and testing.
5. M & E ENGINEER - Code: K19
Requirements:
A recognized degree in Mechanical/Electrical Engineering with 4 to 5 years working experience.
Good knowledge in local and international codes and standards..
Work experience within a consultancy environment or building Industry.
Relevant experience in supervision of M&E construction works.
Hands-on exposure in :
Detailed design of HVAC and fire protection.
Waste water/Oily water system.
6. API-650 TANK ENGINEER
Requirements:
Possess degree in Engineering or its equivalent with minimum 6 years working experience in Oil & Gas Industry.
Familiar with tank fabrication and erection work.
Able to perform design calculations and produce tank fabrication drawings
Knowledge in API-650 Codes and Standards is required..
Able to lead Subcontractor in executing construction Tank Work in accordance to quality and work schedule requirement.
Having good in work planning, control and supervision work.
7. PROCUREMENT EXECUTIVE - Code: K13
Requirements:
Possess a recognized Diploma in Engineering or business management fields.
Candidate with at least 5 years of procurement & purchasing experience.
Experience in desk expediting and shop visit expediting.
Good negotiation skills is necessary to diligently source for quotation and negotiate with vendors/suppliers.
Working knowledge of international sourcing will be an added advantage.
Experience in INCOTERMS, import taxation, export duties and custom clearance.
Experience in dealing with MOF, MIDA, Custom tax exemption matters and Ministry of Finance.
8. QA/QC MANAGER - CIVIL MECHANICAL - Code: K36
Requirements:
Posses Degree in Civil/Building/Mechanical or other Engineering Field.
Minimum 10 years QA/QC working experience in QC Inspection work for Civil, Structure Infra Work and Mechanical/Tankage will be required.
Knowledge and exposure in design work for Civil&Structural and M&E work will be added advantage.
Knowledge in WPS,PQR,WPQT for Mechanical Work is mandatory required.
Well versed with BS Code, ASTM, MS Code and JKR Standard.
Have experience in construction quality control, QA/QC documentation requirement, Inspection Test Plan (ITP), Work Method Statement, testing requirements etc.
Huge exposure on ISO 9001 and experience in Oil & Gas Industry is preferred.
If you are a dynamic individual looking for a fast paced and exciting career, please send your resume with your recent passport-sized Photograph (NR), stating present and expected salary, to the following address:
The Administration Department
Chiyoda Malaysia Sdn. Bhd.
15th Floor, Menara Maxisegar,
Jalan Pandan Indah 4/2, Pandan Indah,
55100 Kuala Lumpur.
or e-mail us at chiyoda@chiyoda.com.my
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment