QA/QC and HSE positions for Qatar

Please read the entire Job Posting carefully so that you can provide the details as requested.

We are looking for following positions for 4-6 months contract for our client, a European EPCM Contractor in Qatar.



1. Piping Inspector
Candidate should be:
Graduate engineer in Mechanical  with 10 + years experience in oil and gas, petrochemical, refinery  EPCM projects
AWS/ CSWIP Certified

2. NDT inspector
Candidate should be:
Graduate engineer in Mechanical with 10 + years  experience in oil and gas, petrochemical, refinery  EPCM projects
ASND level 2 qualified( RT/UT/DPT) Certified
RPS certified

3. HSE Inspector / Supervisor
Candidate should be:
Any Engineering Graduate / Diploma Holder / Science  graduate with 10 + years experience in oil and gas, petrochemical, refinery  EPCM projects
NEBOSH certified ( mandatory)

If you find the above job opportunity interesting and it matches your present job profile, kindly forward your updated CV in Word Format along with following details ASAP so that we can provide confirmation to our client and proceed with your selection process.

Nationality: Indian (Visa Clearance Available for Indians only)
Total Experience:
Gulf Experience:
Experience after Diploma / Graduation
Experience after Certifications:
Current Designation / Title:
Current Salary:
Current Location:
Contact Nos:

Please share this opening with your friends and colleagues for maximum reach of this message.

Send Copy / CC of mail to epcengg@gmail.com also in case my mailbox is full.

For Position No. 1 & 2 please send the CV to following:
Danya Dasan
danya@aarviencon.com
+91-22-40499940    

For Position No. 3 please send the CV to following:
Archana Waghambare
archanaw@aarviencon.com
+91-22-40499939    

Thank You
Team Aarvi

Today's jobs update [22-Aug-12]

1. Welding Inspectors - Algeria

2. Inspectors - Brunel

3. WI/QC Inspector & Welder/Fitter - SapuraKencana



Welding Inspectors - Algeria

we are urgently looking for 3 Welding Inspectors for our Algeria Project. Below are some details of this assignment for your reference and consideration. If this is of your interest then please feel free to send me your updated CV, Welding Cert & complete the application form for further discussion,
Thanks and look forward to hearing from you.

Project: Gassi Touil
Location: Algeria
Position: Welding Inspector X 3
Assignment duration: 3 months assignment require to mobilize ASAP or latest by end Aug eg: After Hari Raya
Work Hour: 9 hrs/day & 54hrs/week
Accommodation, Meal, Local Transport: Provided by Site
Income Tax at assigned Place: Paid by JGC

Regards
Low Wei Chieh
Linkedin: http://sg.linkedin.com/in/wclow
JCON Careers: https://www.jci.sg


Inspectors - Brunel

We wish to invite you to provide inspection services to Brunel worldwide. We currently work with the top 50 marine, O&G companies globally who frequently require inspection services.

Our main requirements are for third party, technical & vendor inspection. For welding, painting, coating, piping, marine, BOM equipment, general NDT - O&G related inspections. Please send us your competitive schedule of rates for on call inspectors in either:

Brunei, Indonesia, Thailand & Malaysia.
We currently need Drill Pipe Inspectors with NS1 & NS2 in Brunei.

We have over 100 offices in 32 countries and we wish to delegate our inspection jobs to reliable, efficient & inexpensive inspection company. Looking forward to your competitive proposal.
Please reply ALL. Thank you, regards,
Marq Surin |  Business Development Manager | Brunel
77 Robinson Road, #10-03| Singapore 068896
t. +65 6571 9336 | m. +65 9655 5540 | f. +65 6532 2536
m.prashad@brunel.net | http://www.brunel.net


WI/QC Inspector & Welder/Fitter - SapuraKencana

Currently we have job vacancies based in Lumut, Perak. The following are the available vacancies for you to post on the institute bulletin/notice:-

1) QC Inspector (Structural/Piping/Mechanical & E&I)
2) Welding Inspector (Structural/Piping)
3) Welder/Fitter

Appreciate if you could provide us the details of your students who are looking for job after they have graduated.

Thanking you in advance and hoping to hear from you soon. You can contact me directly if you have any queries. My contact no. is 03-62095647.

Rgds.
Jackie Choy
HR Dept

SAPURAKENCANA PETROLEUM BERHAD
Level 6, Menara Kencana Petroleum, Solaris Dutamas, No.1, Jalan Dutamas 1, 50480 Kuala Lumpur.
Tel: +603 6209 8000
DID: +603 6209 5647
Fax: +603 6209 5500

Urgent Requirement for Various Personnel to be based in China

Our client, one of the world’s leading FPSO EPC contractor is currently looking for various positions to be based in China.

Details:

Project Type: FPSO
Project Stage: Construction and Fabrication
Project Location: Longxue Island, Nansha, Guangzhou China
Accommodation and Transportation: provided
Working days/hours: 6 days a week/10 hours per day
Rotation: 8 weeks on / 2 weeks off (unpaid)

Requirements:

 Due to the location of the project, our client has a preference in Mandarin speaking applicants.
 Minimum 5 years experience in similar role

IF YOU ARE INTERESTED IN APPLYING KINDLY SUBMIT YOUR APPLICATION TO THE CORRESPONDING RECRUITMENT CONSULTANT WHO IS HANDLING THE POSITION INDICATING THE POSITION YOU WOULD LIKE TO APPLY FOR IN THE SUBJECT FIELD.


Bobby – c.hubalde@brunel.net
 Piping Supervisor
 Coating Supervisor

Jason – j.austria@brunel.net
 Structural Supervisor
 Site Buyer

Jay – j.yap@brunel.net
 E&I Supervisor
 Site Secretary

Sonny – s.gallos@brunel.net
 Mechanical Supervisor
 Site Material Controller


Should you be interested in applying for any of the above mentioned roles, YOU ARE REQUESTED to provide the following information when you submit your application to the respected recruitment consultant who is handling the position?

 Current Location:
 Point of Origin
 Availability/ Notice Period :
 Nationality
 Previous/ Current Package
 Net Day Rate Expectation (USD)

IMPORTANT:

 Due to the volume of applications we are receiving on a daily basis, we can only respond to shortlisted candidates. However, rest assured that your CV will be uploaded in our global database and will be considered for future requirements that match your qualifications
 We understand that you may not be in the position to entertain any job invitations. Thus, please free to pass on this email to anyone who may fit and could be interested for this role.
 If you are currently working for any of Brunel projects, please speak to your appointed Brunel Representative before applying
 If you have been recently contacted by Brunel regarding the above positions, there is no need to re-apply once again.
For detailed Job Specs, please visit our website at www.brunelenergy.net
 All applications will be treated in strict confidentiality.


DEADLINE IN SUBMISSION OF APPLICATIONS: 18 OCTOBER 2011 3PM PM SINGAPORE TIME

Warm Regards,

Brunel International South East Asia Pte Ltd
70 Shenton Way, #12-02 Marina House , Singapore , 079118
Website: www.brunelenergy.net
Check out our current vacancies at www.brunelenergy.jobs

Jobs opening at Chiyoda (Bintulu & Kuala Lumpur)

Chiyoda Malaysia Sdn. Bhd. is an affiliated company of Chiyoda Corporation, Japan which is one of the leading global engineering companies in the fields of LNG, petroleum and petrochemical industries.

Chiyoda Malaysia was established on 12th June 1974 and since then, Chiyoda Malaysia has contributed to the growth and prosperity of the oil & gas industries in Malaysia and grown into one of the leading EPCC contractors in the country.

Chiyoda Malaysia provides high standards of services for multi-disciplinary engineering, procurement, construction and commissioning for turnkey projects and also feasibility studies, front end engineering design, detailed engineering, project and construction management in natural gas, petroleum, petrochemical, bio-fuel, environmental protection and other related industrial plants.

Chiyoda Malaysia is certified to ISO 9001:2008 in the area of "Provision of Engineering, Procurement, Construction and Commissioning Services for Oil & Gas, Petrochemical and Other Related Industries".

We have vacancies in the following positions: (Last Updated: October, 2011)

GROUP A (POSITION TO BE BASED IN BINTULU, SARAWAK )

1. PROJECT/FIELD CONSTRUCTION ENGINEER
Experience in Project planning/scheduling, control and management, tendering, contract administration and project reporting.
Exposure to Plant Construction supervision and activities.
Exposure to relevant Government application and approval for the project being handled.
Capable to prepare project schedule in MS Project/ Primavera.
Exposure to Oil and Gas & Petrochemical is preferred.

2. PIPING SUPERVISOR
Well versed in ANSI, ASME, API & NACE Codes related to piping.
Experience to Piping Plant construction activities.
Familiar with piping components and development of material specification.
Able to perform layout design and prepare GA, Isometric & Pipe support drawings.
Knowledge of PDS 3D will be a strong advantage.
Understand test package document such as ASME, Test Block Diagram, ISO drawing, Calibration Record for Pressure Gauge.
At least two years' experience of piping pressure test inspection.

3. QC DOCUMENT CONTROLLER/CONSTRUCTION CLERK
SPM holder with minimum 3 years working experience.
Computer literate and have good interpersonal and communication skills.
Must be familiar with QC requirements.
Dependable and result oriented.

4. ELECTRICAL SUPERVISOR
Technical qualification of HND technical qualification or equivalent in Electrical Engineering.
Fully conversant in the installation and maintenance requirement for certified EX EQUIPMENT used in hazardous area.
Minimum 6 years of working experience in construction supervision work.
Computer literate and able to communicate in English.
Experience in building electrical and power supply work.
Have experience in construction quality control and HSE requirement.

5. QA/QC MANAGER - CIVIL
Possess a recognized degree in Civil Engineering.
Experience in QA/QC environment ISO 9001:2000 and implementation of QMS.
Familiar with the requirement of International Codes and Standards such as ASME, ANSI, API and BS.
Exposure to Petrochemical Plant Construction.
Experience in developing Project Quality Plan, Work Method Statement and ITP;
QC job responsibility in multi-disciplined field inspection work in construction work.

6. MECHANICAL EQUIPMENT SUPERVISOR
Possess certificate/diploma in Mechanical Engineering or equivalent.
Minimum 6 years working experience in equipment inspection and supervision for mechanical equipment installation work.
Good written skills and communicate well in English.
Good knowledge/ experience on mechanical drawings, specification and procedure.
Experience in supervision of M&E works will be an added advantage;
Good experience in construction quality control and HSE requirement.

7. STATIC/ROTATING EQUIPMENT SUPERVISOR
Possess certificate/diploma in Mechanical Engineering or equivalent.
Minimum 6 years working experience in equipment inspection and supervision for mechanical equipment installation work.
Good written skills and communicate well in English.
Experience with mechanical drawings, specification, procedure for static equipments & structural erection/installations.
Familiar with the requirement of International Codes and Standards.
Have experience in construction quality control and HSE requirement.

8. INSULATION SUPERVISOR
Possess certificate/diploma in Engineering or equivalent.
Minimum 6 years working experience in insulation work in Oil & Gas Industry.
Good written skills and communicate well in English.
Experience with the design of piping systems and piping fabrication/installation.
Have experience in construction quality control and HSE requirement.

9. HSE OFFICER
Diploma or Degree in Engineering or equivalent.
Must be registered with DOSH or to those who has attended SHO training by NIOSH and passed SHO examination by DOSH.
Well versed with Malaysian legislation such as OSHA 1994,FMA 1967, EQA 1974 etc;
At least 8 year(s) of working experience in the related field is required for this position.
Preferably specializing in Environmental/Health/Safety or equivalent.
Good written skills and communicate well in English and Bahasa Malaysia .

10. INSTRUMENT SUPERVISOR
Possess diploma/ degreein Instrument or equivalent.
Minimum 6 years working experience in construction supervision work.
Able to manage, organize and oversee the daily work at site.
Good written skills and communicate well in English.
Strong coordination skills for interfacing work with other work discipline.
Good knowledge on quality and HSE requirements.

GROUP B (POSITION TO BE BASED IN KUALA LUMPUR )

1. SENIOR PROCESS ENGINEER - Code: K05
Requirements:
Possess a recognized degree in Chemical Engineering/Petroleum Engineering with minimum 6 years working experience.
Knowledge in preparation of Process Flow Diagram (PFD) with material & energy balance.
Knowledge in preparation of Piping and Instrumentation Diagram (P&ID).
Knowledge in preparation of Data Sheets furnishing process data.
Able to conduct Hazop and perform process studies and optimization.
Experience in pre-commissioning and commissioning execution work (inclusive development of procedure and schedule).

2. PIPING ENGINEER - Code: K22 / SENIOR PIPING ENGINEER - Code: K01
Requirements:
Possess a recognized degree in Chemical/Mechanical Engineering with 4 years working experience for Piping Engineer.
Possess a recognized degree in Chemical/Mechanical Engineering with minimum 8 years working experience for Senior Piping Engineer.
Well versed in ANSI, ASME, API & NACE Codes related to piping.
Ability to perform piping calculations (wall thickness, branch reinforcement, stress analysis).
Familiar with piping components and development of material specifications.
Able to perform layout design and prepare GA, Isometric & Pipe support drawings.
Knowledge of PDS 3D will be a strong advantage for Piping Designer position.

3. SENIOR ELECTRICAL ENGINEER - Code: K31
Requirements:
Possess a recognized degree in Electrical Engineering with 6 years working experience.
Familiar with all electrical design works and systems such as HV, LV , ELV, Lightning Protection, Cathodic Protection etc.
Job Description:
Preparation of SLD, layouts, Schematic Diagram.
Develop engineering documents such as calculation, specification, requisition, bid evaluation and others.
Coordination with other disciplines and liaison with authorities, consultant and vendors.
Reporting to Electrical Section Head and Project Manager.

4. MECHANICAL ENGINEER - Code: K24
Requirements:
Possess a recognized degree in Mechanical Engineer with minimum 3 to 4 years working experience in oil & gas, petrochemical, chemical or related industry.
Knowledge of static/rotating equipment.
Knowledge in preparation of Datasheets, Specifications, Technical Requisition and Vendor Technical Evaluation.
Relevant knowledge in API, ASME, TEMA, NACE & ISO Codes.
Vendor data/design/drawing review.
Construction site experience is an added advantage.
Preparation of technical and commercial proposal.
Relevant site experience in installation, supervision, trouble shooting, inspection and testing.

5. M & E ENGINEER - Code: K19
Requirements:
A recognized degree in Mechanical/Electrical Engineering with 4 to 5 years working experience.
Good knowledge in local and international codes and standards..
Work experience within a consultancy environment or building Industry.
Relevant experience in supervision of M&E construction works.
Hands-on exposure in :
Detailed design of HVAC and fire protection.
Waste water/Oily water system.

6. API-650 TANK ENGINEER
Requirements:
Possess degree in Engineering or its equivalent with minimum 6 years working experience in Oil & Gas Industry.
Familiar with tank fabrication and erection work.
Able to perform design calculations and produce tank fabrication drawings
Knowledge in API-650 Codes and Standards is required..
Able to lead Subcontractor in executing construction Tank Work in accordance to quality and work schedule requirement.
Having good in work planning, control and supervision work.

7. PROCUREMENT EXECUTIVE - Code: K13
Requirements:
Possess a recognized Diploma in Engineering or business management fields.
Candidate with at least 5 years of procurement & purchasing experience.
Experience in desk expediting and shop visit expediting.
Good negotiation skills is necessary to diligently source for quotation and negotiate with vendors/suppliers.
Working knowledge of international sourcing will be an added advantage.
Experience in INCOTERMS, import taxation, export duties and custom clearance.
Experience in dealing with MOF, MIDA, Custom tax exemption matters and Ministry of Finance.

8. QA/QC MANAGER - CIVIL MECHANICAL - Code: K36
Requirements:
Posses Degree in Civil/Building/Mechanical or other Engineering Field.
Minimum 10 years QA/QC working experience in QC Inspection work for Civil, Structure Infra Work and Mechanical/Tankage will be required.
Knowledge and exposure in design work for Civil&Structural and M&E work will be added advantage.
Knowledge in WPS,PQR,WPQT for Mechanical Work is mandatory required.
Well versed with BS Code, ASTM, MS Code and JKR Standard.
Have experience in construction quality control, QA/QC documentation requirement, Inspection Test Plan (ITP), Work Method Statement, testing requirements etc.
Huge exposure on ISO 9001 and experience in Oil & Gas Industry is preferred.

If you are a dynamic individual looking for a fast paced and exciting career, please send your resume with your recent passport-sized Photograph (NR), stating present and expected salary, to the following address:

The Administration Department
Chiyoda Malaysia Sdn. Bhd.
15th Floor, Menara Maxisegar,
Jalan Pandan Indah 4/2, Pandan Indah,
55100 Kuala Lumpur.

or e-mail us at chiyoda@chiyoda.com.my

Open Vacancies in KL, Kuantan and Kota Kinabalu

MPL Group of Companies specializes in Human Resource Solutions for a broad range of industries, concentrating on supplying manpower and dealing with various issues such as human resource management, foreign labor placements and work permits. At MPL, the combination of impeccable service delivery, best practices, industry expertise, highly experienced professionals and integrated technology makes holistic operations a business reality.

Our client is currently looking for experienced and qualified professionals like you to fulfill several open vacancies. If you consider yourself as a highly passionate and enthusiastic person for the job and have relevant experience working in Construction of Manufacturing Plant (Petrochemical & Chemical Industries), then YOU are wanted!
Please find details of the vacancies available as below:-

A) Positions Available in Kuantan

1) Steel Structure Supervisor
2) Mechanical Supervisor
2) Safety Officer
3) C&I Supervisor
4) Material Controller

Working Experience Minimum 3 years of related work experience
Nationality Malaysian
Preferred Language English
Duration of Services 8 to 24 months

B) Positions Available in Kuala Lumpur

1) Technical Support Engineer - Mechanical
2) C&I Engineer

Working Experience Minimum 3 years of related work experience preferably in Power Plant Construction
Nationality Malaysian
Preferred Language English
Duration of Services 12 months

C) Positions Available in Kota Kinabalu

1) Safety Officer

Working Experience Minimum 3 years of related work experience
Registered with DOSH
Nationality Malaysian preferably Sabahan
Preferred Language English
Duration of Services 12 to 24 months


We encourage you to send us your CV or resume in Microsoft Word format to the below email address:-

i) hrm@mpl.com.my
ii) rm-hrad@mpl.com.my
iii) HR@mpl.com.my

Please indicate the position that you are applying for.

Please state your current and expected salary and notice period required (mobilization date).

Should you think those who are qualified to the above job, kindly disseminate this email to them as well.


Thank you & Best Regards

Jack Chua
Recruiting Manager
Human Resources & Admin Division
RM-HRAD@mpl.com.my

Plant Inspectors / Inspection Engineers for Shutdown Project in Qatar

We are looking for candidates in following categories for 5 week shutdown project in Qatar starting December 2011.

Plant Inspector

Candidate shall have at least five (5) years of current work experience and any two of API 510/570/653
Certification.
He should be conversant with ASME Sec.V, ASME SECVIII, ASME B 31.3 Codes and applicable API
Codes.
Skilled in use of CIMS and MS-Office software and must demonstrate good communication skill in English

• perform inspection of plant equipment and offshore facility during normal operation and shutdowns in compliance with Company's inspection policy, recommended practices (RP) and the guideline of API Codes and Standards
• Review the results of non-destructive testing on piping and equipment.
• Review the results of hardness tests, ID/OD measurements using callipers.
• Review the result of NDT inspection of tubes.
• Witness hydro and pneumatic tests.
• Witness setting of PSV, if assigned by Company.
• Prepare inspection reports with recommendations for approval of Company.


Inspection Engineer

Candidate should be BE / B Tech with at least 5 years experience in Oil & Gas

• Inspect equipment, piping and structures (internally and externally) such as heaters, pressure vessels, fin-fan coolers, boilers, heat exchangers, storage tanks etc. for corrosion and deterioration and assesses the integrity of the equipment.
• Analyse the condition observed and recommend appropriate repair/remedialaction as necessary.
• Prepare inspection work lists for necessary repairs/works for the inspected equipment based on its condition.
• Prepare inspection reports which should include details of all observations (as opened and after cleaning), repairs carried out and recommendations for future corrective/remedial actions. Inspection work lists and inspection reports should be to high professional engineering level.
• Check the condition of safety relief valves, prescribe repairs as required, and witness pressure setting of safety valves.
• Check QA/QC of repairs, capital projects, BMRE works etc for compliance with Company ITP, referred standards and codes.
• Witness hydrostatic and pneumatic tests of equipment and piping.
• Determine appropriate painting/coating scheme for pipelines, structures, equipment and tanks and give recommendations to Company about selection of systems and procedures for quality control.
• Occasionally inspect paint condition and conduct quality control checks for painting jobs.
• Supervise assigned inspectors.
• Develop welding procedures specifications and qualifications thereof.Conduct tests to qualify welders in compliance with ASME Sec. IX.
• Interpret radiographic films and other NDE data and initiate required reports and certificates.
• Carry out any similar or related jobs as directed by supervisor.

Candidates currently available in India can send their updated CV in word format along with current location & current salary details to epcengg@gmail.com

UT-G Technicians

Job Description:
DESIGNATION : UT-G Technicians
• Full time, permanent and contract
• Singaporean/Malaysian passport holders
• Singapore based, working globally

Company Description
K2 Specialist Services Pte Ltd provides technical services including training, inspection and integrity management, design and analysis, construction, maintenance and repair services to the oil and gas industry throughout the Asia Pacific, Central Asia, South America and the Middle East. Specialised equipment and personnel allow us to apply our expertise to the upstream, downstream and marine sectors with equal degrees of quality and efficiency.

Minimum Requirements
• 2 years certification / experience
• IRATA Rope Access Level 1, 2 or 3 Certification advantageous however training will provided to the right candidates
• Extensive travel maybe required

Please email CV and relevant certificates to Claire.mear@k2velosi.com. Company information can be found at www.k2velosi.com. Only successful candidates will be contacted.

PCSB requirement Sept 2011

Dear All,

We have received requirement from PCSB for Various Projects in PMO, SKO, SBO :-

1- Senior General Inspector
2- HSE Inspector
3- E & I Inspector
4- NDT Inspector with UT Set
5. Mechanical & Piping Inspector
6. Material Controller

Work Location : PMO, SKO, SBO
Approx. period of assignment : One (1) year
Tentative commencement date : October 2011

If there are interested candidates to fill up the following positions, kindly please forward the CV,Cert, Validity of Safety Passport, Availability Date, Letter of Consent (Attached) to lieza@petronnic.com or liezaghazali@gmail.com before submission date 29.09.2011.

Appreciate if you could forward the same to your contacts.

Regards,

Lieza Ghazali
Contract & Adminstration Dept.
PETRONNIC SDN BHD
38B-4, Jalan Radin Anum,
Bandar Baru Sri Petaling,
57000 Kuala Lumpur
Tel : 03-90591499
Fax : 03-90592655
Email : lieza@petronnic.com @ admin@petronnic.com

Job opening at Kuantan & Kuala Lumpur

MPL Group of Companies specializes in Human Resource Solutions for a broad range of industries, concentrating on supplying manpower and dealing with various issues such as human resource management, foreign labor placements and work permits. At MPL, the combination of impeccable service delivery, best practices, industry expertise, highly experienced professionals and integrated technology makes holistic operations a business reality.

Our client is currently looking for experienced and qualified professionals like you to fulfill several open vacancies. If you consider yourself as a highly passionate and enthusiastic person for the job and have relevant experience working in Construction of Manufacturing Plant (Petrochemical & Chemical Industries), then YOU are wanted!

Please find details of the vacancies available as below:-

A) Positions Available in Kuantan

1) Safety Officer

2) Mechanical Supervisor

3) Electrical Supervisor

4) C&I Supervisor

5) Piping Supervisor

6) Material Controller

Remuneration Package : Monthly Pay + Allowance

Working Experience : Minimum 3 years of related work experience

Nationality : Malaysian

Preferred Language : English

Duration of Services : 12 to 24 months

B) Positions Available in Kuala Lumpur

1) Technical Support Engineer - Mechanical

2) C&I Engineer

Remuneration Package : Monthly Pay + Allowance

Working Experience : Minimum 3 years of related work experience preferably in Power Plant Construction

Nationality : Malaysian

Preferred Language : English

Duration of Services : 12 months

We encourage you to send us your CV or resume in Microsoft Word format to the below email address:-

i) hrm@mpl.com.my

ii) rm-hrad@mpl.com.my

iii) HR@mpl.com.my

iv) ckhoo@mpl.com.my

Please indicate the position that you are applying for.

Should you think those who are qualified to the above job, kindly disseminate this email to them as well.

Thank you & Best Regards

Various Oil and Gas Jobs - Malaysia

Good day,
Currently we have huge openings in some of our international oil and gas firm. Please share with your colleagues and feedback to us should you be interested to explore further. Attention to me bryant at bryant@chisgroup.com . I’ll try my level best to assist you further


Kuala Lumpur
************
Senior Risk and Safety Engineer 12K-18K
Junior Risk and Safety Engineer –5-8K
Product Project Manager – 6-10K
Master Scheduler – 6-10K
Project Manager – Subsea 10-20K
Commercial Manager – 8-10K
Business Development manager 10-20K


Gelang Patah Johor
*******************
Deputy Site Manager 6k -10k
Welding Supervisor 4k -6k
Fabrication Engineer 4k -6.5k
Buyer OEM 3k-6k
Fabrication Buyer 4k - 6k
QC Inspector 1.5k-2.5k
Assembly Engineer ~ 3 - 5.5K
Control assembly Engineer ~ 3 - 6.5K
NDE Inspector 2 - 4K
QA Engineer 3 -5K
Materials Manager 8 -15K


Labuan
************************
QC Engineer (Labuan) 3k-5k
Workshop Supervisor(Labuan) 2.5k-3.5k


Lumut Perak
***************
Site QA Lead – Subsea China- 6-10K (contract)


Shah Alam
***********
Procurement manager 6-8K
Ast manager Safety 4-5K
Process Engineer 3-4.5K
Welder 1.5-18K
Mechanical Engineer 2-3K
Mechanical technician 1.5-1.8K



Port Klang
**************
QUALITY ENGINEER
PROJECT PLANNER / SR. PROJECT PLANNER
PROJECT ENGINEER
DESIGN ENGINEER - XMT
SOLID WORKS DESIGNER
TEAM LEADER
TOOLING ENGINEER
PROCESS ENGINEER
CNC PROGRAMMER
CLADDING OPERATOR
CNC MACHINISTS
Mechanical Technician
ELECTRICAL TECHNICIAN
HSE ADVISOR
FIELD SERVICE TECHNICIAN

Sri kembangan
**************
3rd Mate/Junior DPO
1st Engineer
Marine Electrician
Lay Electrician
Electronic Technical Officer (ETO)
Senior Warehouseman
Time Keeper
Project HSES Manager
Treasury & Tax Manager
Corporate Analyst
Accountant
Senior Cost Controller
Director of CPS
Lead SCM
Expeditor
Senior BD Manager
Deputy Legal & Contracts Manager
Senior Regulatory Executive
Estimating Engineer
Specialist Engineer
Sr. Specialist Engineer
Technical Manager
Welding Engineer

HSE Inspector - Malaysia

The responsibilities of HSE Inspector position will include but are not limited to the following:

• Monitor HSE quality culture at the project site.
• Verify all the HSE activities and performances carried out by the CONTRACTOR.
• Maintain records on HSE related incidents (LTI, near miss, unsafe act, etc.), meetings and briefings.
• To report any HSE problems/issues to HSE Officer or QA Engineer.
• Areas of works may include:
  a) Tank and vessel fabrication and installation
  b) Pipe fabrication and assembly
  c) Piping alignment to equipment/machinery
  d) Installation of temporary strainers
  e) Installation of proper lubrications
  f) Cleanliness of lubrication system
  g) Machinery run-in
  h) Insulation application
  i) Orifice checking
  j) Surface preparation and coating
  k) Observance and enforcement of safe working practices.
• Maintain records of use of the approved procedures, rejections and corrective actions.
• Ensure safety standards and requirements are observed and bring policy matters to attention of superiors.

Requirements HSE Inspector

• Possess at least 3 years experience in oil & Gas facilities.
• Experience at least 2 projects for Oil Company.
• Diploma / High School.
• Qualified and have valid SHO certificate such as from DOSH / NIOSH.

Terms & Conditions HSE Inspector

• Preferably male
• 6 months primary + 6 months extension (option).

Company Profile

An International Oil & Gas Operating Company.

Location

Malaysia

Click here to apply

http://www.wtsenergy.com/vacancies/vacancy-hse-inspector-360195-31.html

NDT Inspector - Malaysia

The responsibilities of NDT Inspector position will include but are not limited to the following:

• The Scope of Services shall cover but not limited to the provision of following:
  a) Review all NDT procedures and assist in approval.
  b) Ensure NDT operators are qualified, certified and competent to do the job. Ensure the equipment is suitable for the job, calibrated
  and in good condition.
  c) Monitor the performance of NDT activities including interpretation of results.
  d) Verify NDT works by audit if required.
  e) Ensure NDT records including radiographic films are properly kept, maintained, packed and easily retrievable.
  f) Ensure that NDT Contractor comply with the safety requirement during the transportation, storage and use of radioactive sources.
  g) Ensure results of NDT are correct and satisfy the acceptance level of work requirement.
  h) Participate in the resolution of the quality problems as directed by QA Engineer.
  i) Prepare schedules covering his works when required by project controls section.
  j) Assist in preparation of field change notices, extra work orders and back charge notices when required.
  k) Anticipate and take corrective actions to prevent quality problems, failures, defective works and deficient reports.
  l) Submit daily work activity report and other reports as required.
  m) Ensure safety standards and requirements are observed and bring policy matters to attention of superiors.

Requirements NDT Inspector

• Possess at least 3 years experience in oil & Gas facilities.
• Experience at least 2 projects for Oil Company.
• Diploma / High School.
• Experience in inspection of mechanical & piping works.
• Certified examination to CSWIP 3.4 (RT), CSWIP 3.1 (UT) or ASNT Level II equivalent.

Terms & Conditions NDT Inspector

• Preferably male
• 6 months primary + 6 months extension (option).

Company Profile

An International Oil & Gas Operating Company.

Location

Malaysia

Click here to apply

http://www.wtsenergy.com/vacancies/vacancy-ndt-inspector-360194-31.html

General Inspector - Malaysia

The responsibilities of General Inspector will include but are not limited to the following,

• Interpret results of radiography and other NDT methods.
• Monitor project welding quality.
• Witness welding procedure qualification and welder performance tests.
• Maintain records on test, evaluation and measurements.
• Participate in the resolution of the quality problems as directed by QA Engineer.
• Maintain records of works performed within assigned responsibility and ensure quality of material used, verify qualification of personnel performing the work, ensure approved methods are used, ensure advance warnings of possible problem areas of items is provided to the QA Engineer and verify that corrective actions including repair are taken. Keep the QA Engineer informed of the current quality status.
• Areas of works may include:
  a) Tank and vessel fabrication and installation
  b) Pipe fabrication and assembly
  c) Piping alignment to equipment/machinery
  d) Installation of temporary strainers
  e) Installation of proper lubrications
  f) Cleanliness of lubrication system
  g) Machinery run-in
  h) Insulation application
  i) Orifice checking
  j) Surface preparation and coating
  k) Observance and enforcement of safe working practices.
• Cooperate with and assist CONTRACTOR and others, where possible, in the achievement of quality goals.
• Prepare schedules covering his works when required by project controls section.
• Assist in preparation of field change notices, extra work orders and back charge notices when required.
• Maintain records of use of approved procedures, rejections and corrective actions.
• Ensure safety standards and requirements are observed and bring policy matters to attention of superiors.

Requirements General Inspector

• Possess at least 6 years experience in oil & Gas facilities.
• Experience at least 2 projects for Oil Company.
• Familiar with construction methods, installation & testing of equipment, piping, pressure vessels and instrumentation systems.
• Have qualifications of a welding inspector & piping/ mechanical inspector.
• Diploma in any Engineering discipline.
• Possess certified CSWIP 3.1 and/ or CSWIP 3.4, welding inspection & non-destructive testing.

Terms & Conditions General Inspector

• Preferably male
• Duration: 6 (six) months primary + 6 (six) months extension (option)
• Resident in the Field.

Company Profile

An International Oil & Gas Operating Company.

Location

Malaysia

Click here to apply

http://www.wtsenergy.com/vacancies/vacancy-general-inspector-360168-31.html

NDT Inspector - South Itaq

The responsibilities of NDT Inspector position will include but are not limited to the following:

• The Scope of Services shall cover but not limited to the provision of following:
  a) Review all NDT procedures and assist in approval.
  b) Ensure NDT operators are qualified, certified and competent to do the job. Ensure the equipment is suitable for the job, calibrated
  and in good condition.
  c) Monitor the performance of NDT activities including interpretation of results.
  d) Verify NDT works by audit if required.
  e) Ensure NDT records including radiographic films are properly kept, maintained, packed and easily retrievable.
  f) Ensure that NDT Contractor comply with the safety requirement during the transportation, storage and use of radioactive sources.
  g) Ensure results of NDT are correct and satisfy the acceptance level of work requirement.
  h) Participate in the resolution of the quality problems as directed by QA Engineer.
  i) Prepare schedules covering his works when required by project controls section.
  j) Assist in preparation of field change notices, extra work orders and back charge notices when required.
  k) Anticipate and take corrective actions to prevent quality problems, failures, defective works and deficient reports.
  l) Submit daily work activity report and other reports as required.
  m) Ensure safety standards and requirements are observed and bring policy matters to attention of superiors.

Requirements NDT Inspector

• Possess at least 3 years experience in oil & Gas facilities.
• Experience at least 2 projects for Oil Company.
• Diploma / High School.
• Experience in inspection of mechanical & piping works.
• Certified examination to CSWIP 3.4 (RT), CSWIP 3.1 (UT) or ASNT Level II equivalent.

Terms & Conditions NDT Inspector

• Preferably male
• 12 months primary + 12 months extension (option).
• Rotation: 49/21 days
• Arabic speaking is an added advantage.

Company Profile

An International Oil & Gas Operating Company.

Location

South Iraq

Click here to apply

http://www.wtsenergy.com/vacancies/vacancy-ndt-inspector-360193-31.html

Welding Inspector - Malaysia

Job description Welding Inspector

The responsibilities of Welding Inspector position will include but are not limited to the following,

• Interpret results of radiography and other NDT methods.
• Monitor project welding quality.
• Witness welding procedure qualification and welder performance tests.
• Maintain records on test, evaluation and measurements.
• Participate in the resolution of the quality problems as directed by QA Engineer.
• Maintain records of works performed within assigned responsibility and ensure quality of material used, verify qualification of personnel performing the work, ensure approved methods are used, ensure advance warnings of possible problem areas of items is provided to the QA Engineer and verify that corrective actions including repair are taken. Keep the QA Engineer informed of the current quality status.
• Cooperate with and assist CONTRACTOR and others, where possible, in the achievement of quality goals.
• Prepare schedules covering his works when required by project controls section.
• Assist in preparation of field change notices, extra work orders and back charge notices when required.
• Evaluate, verify or check adequacy of welding equipment.
• Review electrode selection, storage and maintenance.
• Monitor, verify or check supplies and materials (including grinding and back-gouging) to be welded and the type of weld to be produced.
• Ensure acceptable fit-ups including joint edge preparation and configuration.
• Conduct dimensional inspections as required for verifications.
• Visually inspect and monitor welding operations (including grinding and back-gouging) and finished works.
• Determine use of appropriate NDT methods and evaluate test results.
• Follow-up on non-conformance and corrective actions including administrative verification.
• Check or otherwise verify heat treatment if required.
• Enforce safety in welding, hot work and NDT operations.
• Witness and document hydrostatic testing of vessels, piping and pipeline systems.
• Witness vessel and pipeline flushing and gauging.
• Establish and maintain records of Welding Procedures, Welder Qualifications/disqualifications, rejects and repairs to ensure that factual.
• and complete information is available to respond to requests and recommendations of Quality Assurance Auditors.
• Make provisions to be informed of any special materials which arrive at site for welding so that new procedures and welder’s test can be formatted if necessary.
• Monitor repair rates of all welders so as to avoid excessive delays due to high rejection rates and recommend, through QA Engineer, for welder re-testing or replacement.
• Maintain records of progress of welding operations if required.
• Assist in ensuring requirements of regulatory authorities and/or Quality Assurance Auditors are implemented and satisfactory.
• Submit daily work activity report and other reports as required.
• Ensure safety standards and requirements are observed and bring policy matters to attention of superiors.

Requirements Welding Inspector

• Possess at least 3 years experience in oil & Gas facilities.
• Experience at least 2 projects for Oil Company.
• Diploma / High School.
• Possess certified CSWIP 3.1 or equivalent..

Terms & Conditions Welding Inspector

• Preferably male
• Duration: 6 months primary + 6 months extension (option).

Company Profile

An International Oil & Gas Operating Company.

Location

Malaysia

To apply click here

http://www.wtsenergy.com/vacancies/vacancy-welding-inspector-360182-31.html

Vacancies for Inspectors for Murphy Oil's job at Bintulu

SGS (M) Sdn Bhd are looking for experienced and qualified personnel to fill the positions for Muprhy Oil GOPA and GOPB additional flowlines, SNPA and SNAA Platforms and Pipelines Works job based in Bintulu. Please see the required positions:

1. Welding Inspector
2. Coating Inspector
3. Mechanical Inspector
4. E&I Inspector

Requirements for each of the positions are as below:

1. Welding Inspector
- 10 year of relevant industry experience
- Fully certified to ANST Level 2 by Inspection Company (Certificates non transferable) or CSWIP or PCN
- Conversant in computer skills (especially MS Office including MS Project and MS Access) will be an added advntage

2. Coating Inspector
- 10 years of relevant industry experience.
- Personnel to have at least five (5) years experience in QA and QC of coatings systems for marine environments.
- 3 years of experience in QA/QC of coating and cathodic protection systems associated with FPSO hull/conversion, new build fixed platform or DTU.
- Certified NACE Level II (minimum), preference will be given to Level III or internationally approved equivalent.
Inspector shall be familiar with offshore oil industry coatings applications.
- Familiar with cathodic protection including impressed current system and classification requirements.
- Conversant in computer skills (especially MS Office including MS Project and MS Access) will be an added advantage.

3. Mechanical Inspector
- 10 years of relevant industry experience
- Higher secondary school certificate
- Relevant diploma or trade certificate with a minimum of 5 years working experience in performing oil and gas equipment experience
Proven ability to interpret drawings, codes and standards and apply that knowledge to field inspections, surveillance and audits of offshore oil and gas mechanical equipment
- Experience on pumps and rotary equipment related to offshore oil and gas equipment

4. E&I Inspector
- Relevant diploma and/or trade certificate or equivalent with a minimum of five (5) years related working experience in performing electrical and instrumentation inspection services in the oil and gas indsutry; or
- Higher secondary school certificate with a minimum of ten (10) years working experience in performing electrical and instrumentation inspection services in the oil and gas industry
- In-depth knowledge of DCS/MCC Systems, Low, Medium, High Voltage equipment and terminations; instrumentation and controls, up to and including loop checking
- The availability to intepret drawings, codes and standards and apply that to field inspections, surveillance and audits of electrical and instrument applications

Interested and meet the minimum requirements as above? Then send your comprehensive resume, relevant certificates and expected salary to shaza.shaharom@sgs.com on or before 8 July 2011.

Only shortlisted candidates will be notified.

Offshore- Static Inspector [API 510] opening for Velosi-Qatar

We are having immediate job openings for Offshore Static Inspector for Maersk Oil in Qatar & look forward for suitable persons to join by June 2011

Experience – 8+ [Minimum 1 Year offshore experience in similar role]

Certification – API 510 certificate Mandatory

Leave Rotation – 28 Days offshore / 28 days vacation

Age limit – 30-50

Client & Location – Maersk Oil / Qatar Offshore [ Middle East Country]

Salary will be competitive & COMPLETE TAX FREE!!!

If you are interested & available please send us your updated CV reflecting offshore and static equipment inspection experience.

Thanks for your valuable time & request for a reply.


Best regards,
Jithraj Thazhath Rajan
HR Coordinator, Velosi Qatar
M | +974 6602.4064 E | jithraj.vq@velosi.com Skype | velosi.jithraj
T | +974 4435.2850 EXT | 158 F | +974 4435.2819 W | www.velosi.com
Office # 1,18 & 20, Eli France Café Building, Ramada Junction, Salwa Road, P.O. Box:3408, Doha, Qatar

Opening in Miri

Dear All,
Assalamualaikum wbth….

New opening for pipeline works onshore in Miri. Contract for 2 years with working days at 4.5/week. Mobilization schedule at around June/July 2011. Client requires engineers frm this 5 disciplines:
1.Piping (2)
2. Structure (2)
3. Electrical & Instrumentation (2)
4. Commissioning (2)
5. Mechanical (2)

Kalau berminat nak try, pls shoot latest CVs to me. Pass circulate to friends seeking for employment.

Wassalam,
zakaria (zack)
0193260812

CWI( AWS or CSWIP) with NDT Level II

We have an inspection request, the details are below.

- Inspection Activity : Witness of Welder Qualification as per approved procedure
- Vendor Location : CRC-Evans Automatic Welding, Malaysia Weld Lab Facility, PTD 188731, Jalan Kotena 3

Kawasan Pelabuhan Johor, 81700 Pasir Gudang, Johor Darul Takzim, Malaysia

- Requirement : CWI( AWS or CSWIP) with NDT Level II

Please let us know if you are interested to carry out this job for us.

Please send us your acceptance and also let us know approximate expenses and distance from your location to the vendor location for this job, so that I can forward your CV to the client.

If you are tied up with some other project please forward this to your friends who will be interested.



Thanking you.


Warm Regards,

Saritha

Inspection Co-ordinator

Cutech Solutions & Services Pte Ltd
#04-32E, IMM Building,2,Jurong East Street 21, Singapore-609601.
Phone: 65-68963556, 66650187,
Mobile: 65 - 91898750; 92331710 ; 91691156 ,
Fax: 65-65605892
Email: inspection@cutechgroup.com, Web: www.cutechgroup.com

GLM looking Coating Inspector, Welding Inspector, AUT & NDT Inspector

Dear All,

As per subject, our requirement as follow;

1. Inspectors with onshore pipeline experience. Inspector who has worked on Gas Malaysia and Sudan project are preferred.

2. Worksite is Australia. 9 weeks work and 3 weeks off.

3. No pay during off. Start in June or July

4. Position:-

• Coating inspectors
• Welding inspectors
• NDT Inspectors (AUT, UT & RI)
• Pipeline hydro test Inspectors

Thanks and Regards

Rusmaria Ismail

Senior Technical Manpower Executive

GL Noble Denton

Phone +60 3 21601088

Mobile +60 19 6090615

Fax + 60 3 2160 1099, 2161 0099

rusmaria.ismail@gl-group.com

www.gl-nobledenton.com

Level 38, Menara Ambank, No.8 Jalan Yap Kwan Seng, 50450 Kuala Lumpur, Malaysia